top of page
Electric Vibro Hammers
Our electric vibro hammers are designed to perform across a wide range of piling applications and ground conditions. They are suitable for driving concrete piles, steel casing piles, round piles, square piles, H-beam piles, and many other pile types. To accommodate different project requirements, the hammers are available with multiple mounting configurations, including fixed leader systems, U-type adaptable leads, and crane-suspended operation. This versatility makes them an ideal solution for marine, civil, and offshore foundation projects where flexibility, reliability, and performance are essential.
Main Features
Anti-vibration design electric motor
Designed for reliability and efficiency, our electric vibro hammers feature anti-vibration electric motors that minimize mechanical stress and improve operational stability. High-performance bearings are rated for continuous operation at temperatures up to 95°C and can safely handle short-term overloads while maintaining high torque output. Combined with durable, high-strength wedge belts, the system delivers dependable power transmission, reduced maintenance requirements, and long-lasting performance in the most demanding piling applications.
FAB X-life bearing
Vibratory hammers place extreme demands on their bearings, which must withstand high impact loads, rapid radial acceleration, high rotational speeds within a compact design, and additional stresses caused by shaft deflection and misalignment. To meet these demanding operating conditions, our electric vibro hammers are equipped with premium FAG X-life bearings. Compared to conventional cylindrical roller bearings, the X-life series offers up to 18% higher load capacity and extends bearing service life by up to 70%, ensuring greater reliability, reduced maintenance, and longer operating intervals.
Product Highlights
DZ-45
Eccentric Moment: 287 NM
Centrifugal Force: 380 KN
Max Line Pull: 180 KN
Max Amplitude: 8.5 mm
Dimensions (w/o clamp L*W*H): 1600 x 1050 x 2000 mm
Weight (w/o clamp): 3800 kg
Clamp Type: Single
Motor Power: 45 KW
Frequency: 1100 rpm
Electric Cable: 35 mm²
Scope for double clamp: Not Applicable
Generator Capacity: 150 KW
Crane Capacity Required: 25 T
DZ-60
Eccentric Moment: 487 NM
Centrifugal Force: 492 KN
Max Line Pull: 215 KN
Max Amplitude: 12 mm
Dimensions (w/o clamp L*W*H): 1750 x 1250 x 2400 mm
Weight (w/o clamp): 4500 kg
Clamp Type: Single
Motor Power: 60 KW
Frequency: 960 rpm
Electric Cable: 35 mm²
Scope for double clamp: Not Applicable
Generator Capacity: 200 KW
Crane Capacity Required: 35 T
DZ-90
Eccentric Moment: 573 NM
Centrifugal Force: 579 KN
Max Line Pull: 254 KN
Max Amplitude: 11.5 mm
Dimensions (w/o clamp L*W*H): 1850 x 1300 x 2500 mm
Weight (w/o clamp): 5700 kg
Clamp Type: Single / Double
Motor Power: 90 KW
Frequency: 960 rpm
Electric Cable: 50 mm²
Scope for double clamp: 800-300 mm
Generator Capacity: 3000 KW
Crane Capacity Required: 50 T
DZJ-90
Eccentric Moment: 573 NM
Centrifugal Force: 579 KN
Max Line Pull: 254 KN
Max Amplitude: 11.5 mm
Dimensions (w/o clamp L*W*H): 1850 x 1300 x 2500 mm
Weight (w/o clamp): 5700 kg
Clamp Type: Single / Double
Motor Power: 90 KW
Frequency: 960 rpm
Electric Cable: 50 mm²
Scope for double clamp: 530-1500 mm
Generator Capacity: 250 KW
Crane Capacity Required: 50 T
DZJ-90B
Eccentric Moment: 48 KGM
Centrifugal Force: 580 KN
Max Line Pull: 300 KN
Max Amplitude: 11 mm
Dimensions (w/o clamp L*W*H): 1600 x 1200 x 2200 mm
Weight (w/o clamp): 5300 kg
Clamp Type: Single / Double
Motor Power: 95 KW
Frequency: 1060 rpm
Electric Cable: 50 mm²
Scope for double clamp: 530-1500 mm
Generator Capacity: 250 KW
Crane Capacity Required: 50 T
DZJ-90B(C)
Eccentric Moment: 48 KGM
Centrifugal Force: 580 KN
Max Line Pull: 300 KN
Max Amplitude: 11 mm
Dimensions (w/o clamp L*W*H): 1600 x 1200 x 2200 mm
Weight (w/o clamp): 5300 kg
Clamp Type: Single / Double
Motor Power: 95 KW
Frequency: 1060 rpm
Electric Cable: 50 mm²
Scope for double clamp: 530-1500 mm
Generator Capacity: 250 KW
Crane Capacity Required: 50 T
DZJ-120
Eccentric Moment: 750 NM
Centrifugal Force: 823 KN
Max Line Pull: 392 KN
Max Amplitude: 12 mm
Dimensions (w/o clamp L*W*H): 2100 x 1400 x 2600 mm
Weight (w/o clamp): 7000 kg
Clamp Type: Single / Double
Motor Power: 120 KW
Frequency: 1000 rpm
Electric Cable: 70 mm²
Scope for double clamp: 600-2000 mm
Generator Capacity: 300 KW
Crane Capacity Required: 70 T
DZJ-135
Eccentric Moment: 806 NM
Centrifugal Force: 883 KN
Max Line Pull: 420 KN
Max Amplitude: 13 mm
Dimensions (w/o clamp L*W*H): 2100 x 1450 x 3000 mm
Weight (w/o clamp): 7200 kg
Clamp Type: Single / Double
Motor Power: 135 KW
Frequency: 1000 rpm
Electric Cable: 70 mm²
Scope for double clamp: 600-2000 mm
Generator Capacity: 300 KW
Crane Capacity Required: 70 T
DZJ-150
Eccentric Moment: 1120 NM
Centrifugal Force: 1140 KN
Max Line Pull: 450 KN
Max Amplitude: 15 mm
Dimensions (w/o clamp L*W*H): 1950 x 1530 x 3225 mm
Weight (w/o clamp): 8700 kg
Clamp Type: Single / Double
Motor Power: 150 KW
Frequency: 960 rpm
Electric Cable: 95 mm²
Scope for double clamp: 600-2000 mm
Generator Capacity: 350 KW
Crane Capacity Required: 80 T
DZJ-180
Eccentric Moment: 1240 NM
Centrifugal Force: 1390 KN
Max Line Pull: 530 KN
Max Amplitude: 12.7 mm
Dimensions (w/o clamp L*W*H): 2250 x 1550 x 3300 mm
Weight (w/o clamp): 11000 kg
Clamp Type: Single / Double
Motor Power: 180 KW
Frequency: 1000 rpm
Electric Cable: 95 mm²
Scope for double clamp: 600-2000 mm
Generator Capacity: 400 KW
Crane Capacity Required: 100 T
DZJ-200
Eccentric Moment: 1604 NM
Centrifugal Force: 1600 KN
Max Line Pull: 588 KN
Max Amplitude: 16 mm
Dimensions (w/o clamp L*W*H): 2200 x 1700 x 3500 mm
Weight (w/o clamp): 11500 kg
Clamp Type: Single / Double / Quadruple
Motor Power: 200 KW
Frequency: 960 rpm
Electric Cable: 120 mm²
Scope for double clamp: 800-3000 mm
Generator Capacity: 450 KW
Crane Capacity Required: 120 T
DZJ-240
Eccentric Moment: 1804 NM
Centrifugal Force: 1822 KN
Max Line Pull: 638 KN
Max Amplitude: 14 mm
Dimensions (w/o clamp L*W*H): 2000 x 1900 x 3500 mm
Weight (w/o clamp): 14500 kg
Clamp Type: Single / Double / Quadruple
Motor Power: 240 KW
Frequency: 960 rpm
Electric Cable: 120 mm²
Scope for double clamp: 800-3000 mm
Generator Capacity: 600 KW
Crane Capacity Required: 130 T
DZJ-300
Eccentric Moment: 2164 NM
Centrifugal Force: 2185 KN
Max Line Pull: 686 KN
Max Amplitude: 16.5 mm
Dimensions (w/o clamp L*W*H): 2200 x 2200 x 3500 mm
Weight (w/o clamp): 15000 kg
Clamp Type: Double / Quadruple
Motor Power: 300 KW
Frequency: 960 rpm
Electric Cable: 150 mm²
Scope for double clamp: 800-3000 mm
Generator Capacity: 600 KW
Crane Capacity Required: 130 T
DZJ-400
Eccentric Moment: 3180 NM
Centrifugal Force: 3250 KN
Max Line Pull: 850 KN
Max Amplitude: 16 mm
Dimensions (w/o clamp L*W*H): 2300 x 1750 x 3900 mm
Weight (w/o clamp): 25000 kg
Clamp Type: Double / Quadruple
Motor Power: 400 KW
Frequency: 960 rpm
Electric Cable: Not Applicable
Scope for double clamp: 800-3000 mm
Generator Capacity: 800 KW
Crane Capacity Required: 200 T
DZJ-480
Eccentric Moment: 3608 NM
Centrifugal Force: 3644 KN
Max Line Pull: 1176 KN
Max Amplitude: 33.5 mm
Dimensions (w/o clamp L*W*H): 4000 x 1950 x 5300 mm
Weight (w/o clamp): 30000 kg
Clamp Type: Quadruple
Motor Power: 480 KW
Frequency: 960 rpm
Electric Cable: Not Applicable
Scope for double clamp: Not Applicable
Generator Capacity: 800 KW
Crane Capacity Required: 200 T
DZJ-600
Eccentric Moment: 4328 NM
Centrifugal Force: 4370 KN
Max Line Pull: 1352 KN
Max Amplitude: 16.5 mm
Dimensions (w/o clamp L*W*H): 4420 x 2150 x 5500 mm
Weight (w/o clamp): 30500 kg
Clamp Type: Quadruple
Motor Power: 600 KW
Frequency: 960 rpm
Electric Cable: Double 150 mm²
Scope for double clamp: Not Applicable
Generator Capacity: 800 KW
Crane Capacity Required: 200 T
Summary Technical Specifications
Image | Name | Eccentric Moment | Centrifugal Force | Max Line Pull | Max Amplitude | Dimensions (w/o clamp L*W*H) | Weight (w/o clamp) | Clamp Type | Motor Power | Frequency | Electric Cable | Scope for double clamp | Generator Capacity | Crane Capacity Required |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DZ-45 | 287 NM | 380 KN | 180 KN | 8.5 mm | 1600 x 1050 x 2000 mm | 3800 kgs | Single | 45 KW | 1100 rpm | 35mm² | 150 KW | 25 T | ||
DZ-60 | 487 NM | 492 KN | 215 KN | 12 mm | 1750 x 1250 x 2400 mm | 4500 kgs | Single | 60 KW | 960 rpm | 35 mm² | 200 KW | 35 T | ||
DZ-90 | 573 NM | 579 KN | 254 KN | 11.5 mm | 1850 x 1300 x 2500 mm | 5700 kgs | Single / Double | 90 KW | 960 rpm | 50 mm² | 800-300 mm | 3000 KW | 50 T | |
DZJ-90 | 573 NM | 579 KN | 254 KN | 11.5 mm | 1850 x 1300 x 2500 mm | 5700 kgs | Single / Double | 90 KW | 960 rpm | 50 mm² | 530-1500 mm | 250 KW | 50 T | |
DZJ-90B | 48 KGM | 580 KN | 300 KN | 11 mm | 1600 x 1200 x 2200 mm | 5300 kgs | Single / Double | 95 KW | 1060 rpm | 50 mm² | 530-1500 mm | 250 KW | 50 T | |
DZJ-90B(C) | 48 KGM | 580 KN | 300 KN | 11 mm | 1600 x 1200 x 2200 mm | 5300 kgs | Single / Double | 95 KW | 1060 rpm | 50 mm² | 530-1500 mm | 250 KW | 50 T | |
DZJ-120 | 750 NM | 823 KN | 392 KN | 12 mm | 2100 x 1400 x 2600 mm | 7000 kgs | Single / Double | 120 KW | 1000 rpm | 70 mm² | 600-2000 mm | 300 KW | 70 T | |
DZJ-135 | 806 NM | 883 KN | 420 KN | 13 mm | 2100 x 1450 x 3000 mm | 7200 kgs | Single / Double | 135 KW | 1000 rpm | 70 mm² | 600-2000 mm | 300 KW | 70 T | |
DZJ-150 | 1120 NM | 1140 KN | 450 KN | 15 mm | 1950 x 1530 x 3225 mm | 8700 kgs | Single / Double | 150 KW | 960 rpm | 95 mm² | 600-2500 mm | 350 KW | 80 T | |
DZJ-180 | 1240 NM | 1390 KN | 530 KN | 12.7 v | 2250 x 1550 x 3300 mm | 11000 kgs | Single / Double | 180 KW | 1000 rpm | 95 mm² | 600-2500 mm | 400 KW | 100 T | |
DZJ-200 | 1604 NM | 1600 KN | 588 KN | 16 mm | 2200 x 1700 x 3500 mm | 11500 kgs | Single / Double / Quadruple | 200 KW | 960 rpm | 120 mm² | 800-3000 mm | 450 KW | 120 T | |
DZJ-240 | 1804 NM | 1822 KN | 638 KN | 14 mm | 2000 x 1900 x 3500 mm | 14500 kgs | Single / Double / Quadruple | 240 KW | 960 rpm | 120 mm² | 800-3000 mm | 600 KW | 130 T | |
DZJ-300 | 2164 NM | 2185 KN | 686 KN | 16.5 mm | 2200 x 2200 x 3500 mm | 15000 kgs | Double / Quadruple | 300 KW | 960 rpm | 150 mm² | 800-3000 mm | 600 KW | 130 T | |
DZJ-400 | 3180 NM | 3250 KN | 850 KN | 16 mm | 2300 x 1750 x 3900 mm | 25000 kgs | Double / Quadruple | 400 KW | 960 rpm | 800-3000 mm | 800 KW | 200 T | ||
DZJ-480 | 3608 NM | 3644 KN | 1176 KN | 33.5 mm | 4000 x 1950 x 5300 mm | 30000 kgs | Quadruple | 480 KW | 960 rpm | 800 KW | 200 T | |||
DZJ-600 | 4328 NM | 4370 KN | 1352 KN | 16.5 mm | 4420 x 2150 x 5500 mm | 30500 kgs | Quadruple | 600 KW | 960 rpm | Double 150 mm² | 800 KW | 200 T |
bottom of page